Manualsbrain.com
  1. Manuals
  2. Brands
  3. Brother
  4. MFC-5460CN
  5. User Manual

Brother MFC-5460CN User Manual

Download
Page of 34
Installing the Driver & Software
23
M
aci
n
to
sh
®
US
B
Macintosh
®
 
 
3
For USB Interface Users
(For Mac OS
®
 X 10.2.4 or greater)
Important
Make sure that you have finished the 
instructions from Step 1 Setting Up the 
Machine on pages 4 through 13.
Note
For Mac OS
®
 X 10.2.0 to 10.2.3 users, upgrade to 
Mac OS
®
 X 10.2.4 or greater. (For the latest 
information for Mac OS
®
 X, visit  
 
1
Lift the scanner cover until it locks securely into 
the open position.
 
2
Connect  the USB cable to the USB socket 
marked with a 
 symbol. You will find the 
USB socket inside the machine on the right as 
shown below.
 
3
Carefully guide the USB cable into the trench 
as shown below, following the trench around 
and toward the back of the machine. Then, 
connect the cable to your computer.
 
Improper Setup
• DO NOT connect the machine to a USB port on 
a keyboard or a non-powered USB hub. 
Brother recommends that you connect the 
machine directly to your computer.
• Make sure that the cable does not restrict the 
cover from closing, or an error may occur.
 
4
Lift the scanner cover to release the lock (   ).
Gently push the scanner cover support 
down (
) and close the scanner cover (   ).
 
Note
Make sure that the machine is turned on by 
connecting the power cord.
 
5
Turn on your Macintosh
®
.
6
Put the supplied CD-ROM into your CD-ROM drive.