Fujitsu M10 User Manual
2. Operation and Administration
- 20 -
Configure the entire system including power control. The green IT function mini-
mizes the power consumption of the system.
Reference
Fujitsu M10/SPARC M10 Systems System Operation and
Administration Guide
"Chapter 4 Configuring the System to Suit the Usage Type"
c. Configuring the system
You can configure a virtual environment by dividing the system into physical parti-
tions or logical domains. You can run a standalone operating system in each logical
domain.
Reference
Fujitsu M10/SPARC M10 Systems Domain Configuration Guide
"Chapter 4 Physical Partition Configuration Example"
"Chapter 5 Logical Domain Configuration Example"
d. Configuring a virtual environment
a. Conducting daily management
You should understand the basic operations, which include logging in/out from the
management console and starting/stopping the system. These basic operations are
required for system operation and management and for daily management work
items, such as backup.
Reference
Fujitsu M10/SPARC M10 Systems System Operation and
Administration Guide
"Chapter 2 Logging In/Out of the XSCF"
"Chapter 6 Starting/Stopping the System"
"Chapter 9 Managing the SPARC M10 Systems Daily"
"Chapter 13 Switching to Locked/Service Mode"
"Chapter 9 Managing the SPARC M10 Systems Daily"
"Chapter 13 Switching to Locked/Service Mode"
b. Customizing eXtended System Control Facility (XSCF) settings
From the initial setup of the eXtended System Control Facility, you can customize
the configuration according to your use environment.
Reference
Fujitsu M10/SPARC M10 Systems System Operation and
Administration Guide
"Chapter 3 Configuring the System"