Fujitsu plasmavision p42hta51e User Manual
E-12
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
Press OFF/ON
to the left at the bottom of the display to the STD-
BY state.
The power lamp lights up.
2
Press
on the remote control.
The color of the power lamp changes from “Red” to “Green”.
3
Press
, the button of the channel you want to watch, and then
press
or
.
Select TV or the picture mode to input.
4
Press
when the power is ON.
The color of the power lamp changes from “Green” to “Red” and the display goes into standby
state.
state.
ADJUSTING THE VOLUME
Adjusting the volume
Press
1
to increase the volume.
Press
2
to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
Press
-
.
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume
buttons.
buttons.
* You can also use the buttons
on the display’s control
panel to perform these steps.
panel to perform these steps.
* You can also use the buttons
on the display’s control
panel to perform these steps.
panel to perform these steps.
When the volume adjustment button is
pressed
pressed
Note
• Functions may not be available with some models and some device options.
01_E_7473.book 12 ページ ２００６年９月６日 水曜日 午後２時３６分