Belkin f5d7330 xbox set up User Manual
F5D7330
ADHOC Configuration on two XBOX.
To Use the F5D7330 in Adhoc mode you will need to configure first the Ethernet Bridge on a computer as the
XBOX cannot access the web interface. Make sure that your computer is equipped with an Ethernet card and
connect the Ethernet Bridge to it.
XBOX cannot access the web interface. Make sure that your computer is equipped with an Ethernet card and
connect the Ethernet Bridge to it.
You will need to make sure that you entered an IP address matching the Ethernet Bridge (192.168.2.225)
To do this right click on my network places and click on property
Then right click on the connection for your Ethernet card and click on properties
Then highlight “internet protocol TCP/IP” and click on properties
Select Use the following IP address on the following screen and enter an IP address in the same range as the
Ethernet bridge in this case 192.168.2.251 and then click on ok and ok again and come back to the desktop.