ZyXEL Communications prestige 314 plus User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

9-4 

SNMP Configuration 

Get Community 

Type the Get Community, which is the password for the incoming 
Get- and GetNext requests from the management station. 

Set Community 

Type the Set community, which is the password for incoming Set 
requests from the management station.  

Trusted Host 

If you enter a trusted host, your Prestige will only respond to SNMP 
messages from this address. A blank (default) field means your 
Prestige will respond to all SNMP messages it receives, regardless 
of source. 

Trap: Community 

Type the trap community, which is the password sent with each 
trap to the SNMP manager.  

Trap: Destination 

Type the IP address of the station to send your SNMP traps to. 

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

The Prestige will send traps to the SNMP manager when any one of the following events occurs: 

0 

coldStart (defined in RFC-1215) 

A trap is sent after booting (power on). 

1 

warmStart (defined in RFC-1215) 

A trap is sent after booting (software reboot). 

2 

LinkUp 

A trap is sent when the link is established. 

3 

LinkDown 

A trap is sent when the link is down. 

4 

authenticationFailure (defined in 
RFC-1215) 

A trap is sent to the manager when receiving any SNMP 
get or set requirements with wrong community (password). 

6 

whyReboot (defined in ZYXEL-
MIB) 

A trap is sent with the reason of restart before rebooting 
when the system is going to restart (warmstart). 

6a 

For intentional reboot: 

A trap is sent with the message "System reboot by user!" if 
reboot is done intentionally, (e.g. download new files, CI 
command "sys reboot", etc.).