ZyXEL Communications prestige 314 plus User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

Firmware and Configuration Maintenance 

12-3 

Please note that terms “download” and “upload” are relative to the computer. Download means to transfer 
from the Prestige to the computer, while upload means from your computer to the Prestige. 

Follow the instructions as shown in the next screen.  

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open”, followed by a space and the IP address of your Prestige.  

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter your password as requested (the default is “1234”). 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0 config.rom” 

transfers the configuration file on the Prestige to your computer and renames it “config.rom”. See 
earlier in this chapter for more information on filename conventions. 

Step 7.  Enter “quit” to exit the ftp prompt.  

Menu 24.5 - System Maintenance - Backup Configuration 

To transfer the configuration file to your workstation, follow the procedure 

below: 

 

1. Launch the FTP client on your workstation. 

2. Type "open" and the IP address of your router. Then type "root" and 

  SMT password as requested. 
3. Locate the 'rom-0' file. 

4. Type 'get rom-0' to back up the current router configuration to 

  your workstation. 

 

For details on FTP commands, please consult the documentation of your FTP 
client program. For details on backup using TFTP (note that you must remain 

in this menu to back up using TFTP), please see your router manual. 

 

 

Press ENTER to Exit: