Netgear rangemax wn802t User Manual

1-2

Introduction

•

Multi-In, Multi-Out (MIMO) technology. Provides improved communication performance 
without additional bandwidth or transmit power. .

•

Standards Compliance. Complies with Draft 2.0 802.11n for wireless LANs, and is 
backward compatible with 802.11bg.

•

Full WPA and WPA2 support. WPA and WPA2 personal and enterprise-class strong security 
with dynamic encryption key generation. TKIP and AES encryption are supported.

•

DHCP client support. The WN802T v2 can act as a DHCP client and obtain information 
from your DHCP server for the WLAN.

•

Access control MAC address filtering. The access control MAC address filtering feature can 
ensure that only trusted wireless stations can use the WN802T v2 to gain access to your LAN. 
Local and remote MAC address authentication are supported.

•

Easy-to-use web-based GUI. A web-based GUI makes installation and management easy for 
all users.

•

Auto-sensing ethernet connection with Auto-Uplink interface. Connects to 10/100/1000 
Mbps IEEE 802.3 Ethernet networks.

•

WMM Power Save. Allows power-critical devices to fine-tune power consumption and save 
power by buffering data transmitted to them.

•

Front panel LEDs. Front panel LEDs allow easy monitoring of status and activity.

•

Flash memory. Allows for easy firmware upgrades.

•

Quality of Service (QoS) Support. You can configure parameters that affect traffic flowing 
from the wireless access point to the client station and from the client station to the wireless 
access point. The QoS feature allows you to prioritize time-sensitive traffic such as voice and 
video traffic.

•

Three modes for maximum flexibility: 

–

Access Point. In this mode, operates as a standard 802.11n wireless access point.

–

Wireless Multi-Point Bridging. In this mode, acts as a wireless AP or wireless bridge for 
a group of bridge-mode wireless partners. 

–

Wireless Repeater Bridging. In this mode, operates as a wireless bridge without client 
association.