Netgear rangemax wn802t User Manual

2-1

This chapter describes how to set up your NETGEAR Wireless-N Access Point WN802T v2 for 
wireless connectivity to your LAN. This basic configuration will enable computers with 
802.11bgn or 802.11bg wireless adapters to connect to the Internet, or access printers and files on 
your LAN.

You need to prepare these three things before you can establish a connection through your wireless 
access point:

•

A location for the WN802T v2 that conforms to the guidelines in the next section.

•

The wireless access point connected to your LAN through a device such as a hub, switch, 
router, or cable/DSL gateway. 

•

One or more computers with properly configured 802.11bgn or 802.11bg wireless adapters.

The operating distance or range of your wireless connection can vary significantly based on the 
physical placement of the wireless access point. The latency, data throughput performance, and 
notebook power consumption of wireless adapters also vary depending on your configuration 
choices.

Note: Indoors, computers can connect over 802.11bgn or 802.11bg wireless networks at 

ranges of several hundred feet or more. This distance can allow for others outside 
your area to access your network. It is important to take appropriate steps to secure 
your network from unauthorized access. The NETGEAR Wireless-N Access Point 
provides highly effective security features which are covered in detail in 

. Deploy the security features appropriate to your 

needs