Netgear rangemax wn802t User Manual

Wireless Security Settings

3-5

–

Wireless Client Security Separation. If enabled, the associated wireless clients will not 
be able to communicate with each other (this feature is intended for hotspots and other 
public access situations). The default is No.

For a new wireless network, print or copy this form and fill in the configuration parameters. For an 
existing wireless network, the person who set up or is responsible for the network will be able to 
provide this information. Be sure to set the Regulatory Domain correctly as the first step.

•

SSID: The Service Set Identification (SSID) identifies the wireless local area network. 
NETGEAR is the default WN802T v2 SSID. However, you may customize it by using up to 
32 alphanumeric characters. Write your customized SSID on the following line.

___________________________________

Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter 
card. All wireless nodes in the same network must be configured with the same SSID: 

Circle one: Open System or Shared Key (select Shared Key for more security).

Note: If you select shared key, the other devices in the network will not connect unless they 
are set to Shared Key as well and have the same keys in the same positions as those in the 
WN802T v2.

Circle one: 64, 128, or 152 bits. (Enter all four WEP encryption keys for the key size chosen.)

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

Note: If you are using a RADIUS server, configure the RADIUS settings first, as