Fujitsu fi-6010N User Manual

Page of 21
iii
Introduction
Thank you for purchasing the fi-6010N Network 
Scanner.
This easy-to-operate network scanner is used to scan 
documents for further use.
■ Manuals
The following manuals are prepared for the 
scanner. Read them as needed.
■ Regulatory Information
FCC Declaration
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications. However, 
there is no guarantee that interference will not 
occur in a particular installation. If this equipment 
does cause harmful interference to radio or 
television reception, which can be determined by 
turning the equipment off and on, the user is 
encouraged to try to correct the interference by 
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment 
and receiver.
•Connect the equipment into an outlet on a circuit 
different from that to which the receiver is 
located.
•Consult your dealer or an experienced radio/TV 
technician.
FCC warning: Changes or modifications not 
expressly approved by the party responsible for 
compliance could void the user’s authority to 
operate the equipment.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B 
limit for radio noise emissions from digital 
apparatus set out in the Radio interference 
Regulations of the Canadian Department of 
Communications.
This Class B digital apparatus complies with 
Canadian ICES-003.
Le présent appareil numérique n'émet pas de 
parasites radioélectriques dépassant les limites 
applicables aux appareils numériques de la classe 
B et prescrites dans le Règlement sur le brouillage 
radioélectrique dictées par le Ministère des 
Communications du Canada.
Cet appareil numérique de la classe B est 
conforme _ la norme NMB-003 du Canada.
Bescheinigung des Herstellers / 
Importeurs
Für den fi-6010N wird folgendes bescheinigt:
•In Übereinsstimmung mit den Bestimmungen 
der EN45014(CE) funkentstört 
•Maschinenlärminformationsverordnung 3. 
GPSGV: Der höchste Schalldruckpegel beträgt 
70 dB (A) oder weniger, gemäß EN ISO 7779.
Manual
Description
fi-6010N Net-
work Scanner 
Getting Started 
(This Manual) 
(paper)
Provides useful and detailed 
information on setting up, 
connecting, and caring for 
your scanner.
Read this manual first.
fi-6010N Net-
work Scanner 
Operator's 
Guide (PDF)
Contains further information 
about scanner settings, scan-
ner administration, and scan-
ner operations, and may be 
used as a general reference.
To read the manual, down-
load it from the scanner. For 
more details about how to 
download the manual, refer 
to "Chapter 5 Downloading 
the Manual" (page14)
In this guide, it is indicated 
as "Operator's Guide".
ATTENTION
The use of a shielded interface cable 
is required to comply with the Class B 
limits of Part 15 of FCC rules.
The length of the AC cable must be 2 
meters (6.6 feet) or less.
fi-6010N Network Scanner Getting Started
iv
■ Note of Liability
BEFORE USING THIS PRODUCT, PLEASE 
READ THIS MANUAL CAREFULLY. IF THIS 
PRODUCT IS NOT USED CORRECTLY, 
UNEXPECTED INJURY CAN OCCUR TO 
USERS OR BYSTANDERS.
Keep this manual in a safe place so that it can be 
easily referred to during use of this product.
While all efforts have been made to ensure the 
accuracy of all information in this manual, PFU 
assumes no liability to any party for any damage 
caused by errors or omissions or by statements of 
any kind in this manual, its updates or 
supplements, whether such errors are omissions or 
statements resulting from negligence, accidents, 
or any other cause. PFU further assumes no 
liability arising from the application or use of any 
product or system described herein; nor any 
liability for incidental or consequential damages 
arising from the use of this manual. PFU disclaims 
all warranties regarding the information contained 
herein, whether expressed, implied, or statutory.
Use in High-safety Applications
This product has been designed and manufactured 
on the assumption that it will be used in office, 
personal, domestic, regular industrial, and 
general-purpose applications. It has not been 
designed and manufactured for use in applications 
(simply called "high-safety applications" from 
here on) that directly involve danger to life and 
health when a high degree of safety is required, 
for example, in the control of nuclear reactions at 
nuclear power facilities, automatic flight control 
of aircraft, air traffic control, operation control in 
mass-transport systems, medical equipment for 
sustaining life, and missile firing control in 
weapons systems, and when provisionally the 
safety in question is not ensured. The user should 
use this product with adopting measures for 
ensuring safety in such high-safety applications. 
PFU LIMITED assumes no liability whatsoever 
for damages arising from use of this product by 
the user in high-safety applications, and for any 
claims or compensation for damages by the user 
or a third party.
About the Use of Mercury
To avoid unexpected injuries: 
•Do not lick or consume the substance contained 
in the lamp.
•Do not breathe the chemical liquid contained in 
the scanner lamps.
•Do not incinerate, crush, or shred the lamps or 
scanner parts.
LCD Peculiarities
•The LCD backlight is a fluorescent tube that 
contains some mercury.
•Be aware that neither of the following is 
considered a fault.
• Despite the advanced technologies used 
to produce the devices TFT color 
LCD's, the large number of pixels 
involved means that an occasional 
(always-on) bright dot or (always-off) 
dark dot may be visible.
• The characteristics of the LCD mean 
that there may be some variation in hue 
and intensity of colors across the screen.
Replacing Batteries
This product has a battery (CMOS RAM battery) 
on board to retain data such as
•Warning
• Do not replace the battery yourself, as 
there is a risk of explosion if the wrong 
type is used. Please contact your main-
tenance engineer in charge when the 
battery runs low.
• Do not touch the battery. Never install 
or remove the battery by yourself. 
Doing so may cause electric shock or 
static electricity which can damage the 
device.
About Maintenance
The user must not perform repairs on this scanner.
Contact your FUJITSU scanner dealer or an 
authorized FUJITSU scanner service provider for 
repairs to this product.
■ Trademarks
Microsoft, Windows, and Windows Vista are 
registered trademarks of Microsoft Corporation in 
the United States and/or other countries.
Adobe, the Adobe logo, and Acrobat are either 
registered trademarks of Adobe Systems 
Incorporated in the United States and/or other 
countries.
ABBYY
TM
 FineReader
TM
 7.x Engine © ABBYY 
Software House 2005.
Lamp(s) inside this product contain 
mercury and must be recycled or 
disposed of according to local, state, 
or federal laws. 
H
g