Fujitsu plasmavision pds5001u User Manual

Any value between -30 and +30 can be selected.

: Higher contrast

: Lower contrast

Press 

 to store.

Any value between -60 and +60 can be selected.

: Brighter screen

: Darker screen

Press 

 to store.

Any value between -60 and +60 can be selected.

: Darker colors

: Lighter colors

Press 

 to store.

Any value between -30 and +30 for [

], and -60 and +60 for [

] can be selected.

: More greenish colors

: More purplish colors

Press 

 to store.

Any value between -16 and +16 can be selected.

: Sharper pictures

: Less sharp pictures

Press 

 to store.

You can use this option to make a dynamic gamma correction suitable for still or motion pictures.

Each time you press   or  , one of the available choices appears in the following sequence:

Dinamic1, 2, 3, 4:Suitable for watching a motion picture.(Use either of better picture quality.)

Static:

Suitable for watching a still picture.

Press 

 to store.

* Can select Static only in RGB mode.

Use   or 

 to specify a desired color temperature.  Each time you press   or 

, one of the available choices appears in the following sequence:

Warm:

More reddish colors

Standard:Standard color temperature
Cool:

More bluish colors

User:

User Color Temp. setup

Can set up when User is selected in Color Temp.

Press 

 or 

 to select Red, Green or Blue and press   or 

 to make adjustment in the range

of 0 to 255.

* Color Temp. setup is switched to User. The initial value of User Color Temp. is  adjusted

individually at the factory.

Can select the noise reduction setting corresponding to the noise level of the input signal.

Each time you press   or 

 ,one of the available choices appears in the following sequence:

Off:

Noise reduction does not function.

Min.: Weak setting

Std.: Standard setting

Max.: Strong setting

*Some type of signal can not be selected.

User Color Temp.adjustment screen