Nilfisk 784 s User Manual

 

Adjusting Squeegee Blades
When properly installed the front blade should be ap-
proximately .06 above the rear blade.  See figure #29.
Adjusting Squeegee Support Wheels:

The support wheels should be set at .12 above the floor
with the rear blade touching the floor.  See figure #31.

Consult your ALTO Authorized Service Person to do
the service procedures.

Use only genuine ALTO parts.

If the solution line becomes clogged, pull the filter
assembly out from behind the brush housing (Figure
#30 and remove the filter screen (Figure # 31) and
clean or replace it.  Push filter assembly back inside
frame.

 

.12