NEC multisync lcd1970v User Manual

English

LCD Module

Diagonal:

48.2 cm/19.0 inches

Active matrix; thin film transistor (TFT)

Viewable Image Size:

48.2 cm/19.0 inches

liquid crystal display (LCD); 0.294 mm dot

Native Resolution (Pixel Count):

1280 x 1024

pitch; 250 cd/m

2 

*

3

 white luminance;

500:1 contrast ratio, typical.

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Digital Input: DVI

Sync:

Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative*

2

Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*

2

Display Colours

16,777,216

Depends on display card used.

Synchronization Range

Horizontal:

31.5 kHz to 81.1 kHz (Analog)

Automatically

31.5 kHz to 81.1 kHz (Digital)

Automatically

Vertical:

56.0 Hz to 75.0 Hz

Automatically

Viewing Angle

Left/Right:

88°/88° (CR > 10)

Up/Down:

88°/88° (CR > 10)

Resolutions Supported

720 x 400*

1

 : VGA-Text

Some systems may not support all modes

640 x 480*

1

 at 60 Hz to 75 Hz

listed.

800 x 600*

1

 at 56 Hz to 75 Hz

832 x 624*

1

 at 75 Hz

1024 x 768*

1

 at 60 Hz to 75 Hz

1152 x 870*

1

 at 75 Hz

1280 x 1024 at 60 Hz to 75 Hz....................NEC DISPLAY SOLUTIONS cites

recommended resolution at 60 Hz for
optimal display performance.

Active Display Area

Horizontal:

376.3 mm/14.8 inches

Vertical:

301.1 mm/11.9 inches

Power Supply

AC 100-240V ~ 50/60Hz

Power Consumption

38W (typ)

(without optional Sound Bar)

Current Rating

1.2-0.6A

Dimensions

412.5 mm (W) x 386.5-496.5 mm (H) x 220.0 mm (D)
16.2 inches (W) x 15.2-19.5 inches (H) x 8.7 inches (D)

Weight

Net:

8.1 kg (17.9 lbs)

Gross:

10.4 kg (22.9 lbs)

Environmental Considerations

Operating Temperature:

5°C to 35°C/41°F to 95°F

Humidity:

30% to 80%

Feet:

0 to 10,000 Feet

Storage Temperature:

-10°C to 60°C/14°F to 140°F

Humidity:

10% to 85%

Feet:

0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.
*3 LCD Module at 25°C.

Technical specifications are subject to change without notice.