National Instruments SCC-AI14 User Manual

© National Instruments Corporation

❑

One or more SCC-SGXX

❑

❑

❑

❑

SC-2345 Quick Reference Label

❑

68-pin Basic or E Series DAQ device, documentation, 
and 68-pin cable

❑

1/8 in. flathead screwdriver

❑

Numbers 1 and 2 Phillips screwdrivers

❑

Wire insulation strippers

❑

NI-DAQ (current version) for Windows 2000/NT/XP/Me

Software scaling of measurements is not supported on the Macintosh operating 

system. Refer to the 

 section.

SCC modules are shipped in antistatic envelopes to prevent electrostatic 
damage (ESD) to the modules. ESD can damage several components on 
these products.

Never touch the exposed pins of connectors. 

To avoid damage from ESD when you handle the module, take the 
following precautions:

•

Ground yourself by using a grounding strap or by touching a grounded 
object.

•

Touch the antistatic envelope to a metal part of the computer chassis 
before removing the module from the envelope.

Remove the module

 

from the envelope and inspect the module

 

for loose 

components or any sign of damage. Notify NI if the module

 

appears 

damaged in any way. Do not install a damaged module.

Store the module in the antistatic envelope when it is not in use.