Konica Minolta DI2510 User Manual
7
Utility Mode Operations
7-32
Di2510/Di3010/Di3510
5
Select the size of the image
document.
Touch [Enter].
To continue scanning a standard-
sized image document, skip to
step 9.
document.
Touch [Enter].
To continue scanning a standard-
sized image document, skip to
step 9.
H
To scan a non-standard-sized
image document, touch
[Custom Size].
image document, touch
[Custom Size].
6
Press the [C] key to erase the
current value, and then use the
10-Key Pad to type in the length of
side X for the image document
(between 25 and 432 mm).
Touch [Y], and then press the [C]
key to erase the current value.
Use the 10-Key Pad to type in the
length of side Y for the image
document (between 25 and
297 mm).
current value, and then use the
10-Key Pad to type in the length of
side X for the image document
(between 25 and 432 mm).
Touch [Y], and then press the [C]
key to erase the current value.
Use the 10-Key Pad to type in the
length of side Y for the image
document (between 25 and
297 mm).
7
Touch [Enter].
8
Position the document on the glass,
and then select the orientation of
the document.
and then select the orientation of
the document.
9
Press the [Start] key.
The image is scanned.
The image is scanned.
The image stamp is registered.