Kenwood TM-271E User Manual
16
4
MH
Z
M
ODE
If the desired operating frequency is far away from the
current frequency, it is quicker to use the MHz Tuning
Mode.
current frequency, it is quicker to use the MHz Tuning
Mode.
To adjust the MHz digit:
1 While in VFO or Call Mode, press [MENU].
• The MHz digit blinks.
2 Turn the Tuning control to select the desired MHz
value.
3 Press any key to set the selected frequency and
return to normal VFO Mode.
4 Continue adjusting the frequency as necessary, using
the Tuning control or Mic [UP]/[DWN].
D
IRECT
F
REQUENCY
E
NTRY
In addition to turning the Tuning control or pressing Mic
[UP]/[DWN], there is another way to select the
frequency. When the desired frequency is far away from
the current frequency, you can directly enter a frequency
using the Mic keypad (keypad models only).
[UP]/[DWN], there is another way to select the
frequency. When the desired frequency is far away from
the current frequency, you can directly enter a frequency
using the Mic keypad (keypad models only).
1 Press [VFO].
• You must be in VFO mode to make a direct frequency
entry.
2 Press the Mic PF key assigned the ENTER function
{page 59}.
3 Press the numeric keys ([0] to [9]) to enter your
desired frequency.
• Pressing Mic Enter fills all remaining digits (the digits
you did not enter) with 0 and completes the entry. For
example, to select 145.000 MHz, press [1], [4], [5] and
press Mic Enter to complete the entry.
example, to select 145.000 MHz, press [1], [4], [5] and
press Mic Enter to complete the entry.
• If you want to revise the MHz digits only, leaving the kHz
digits as they are, press Mic [VFO] in place of Mic
Enter.
Enter.