Sennheiser EK 2000 User Manual
30
Synchronizing a transmitter with the receiver
Synchronizing a transmitter with the
receiver
receiver
Upon delivery, transmitter and diversity receiver are synchronized with
each other. If, however, you cannot establish a transmission link between
transmitter and diversity receiver, you have to synchronize the channels of
the devices:
each other. If, however, you cannot establish a transmission link between
transmitter and diversity receiver, you have to synchronize the channels of
the devices:
왘
Deactivate the RF signal on all transmitters (see the instruction manual
of the transmitter).
This prevents that, during the frequency scan, the channels used by
switched-on transmitters are displayed as “used”.
of the transmitter).
This prevents that, during the frequency scan, the channels used by
switched-on transmitters are displayed as “used”.
왘
With a diversity receiver, perform a frequency preset scan to scan the
frequency banks for unused channels (“
frequency banks for unused channels (“
Scan New List
왘
Select a frequency bank and a channel on this diversity receiver
(“
(“
Current List
If you want to set up a multi-channel system, select a frequency bank
with a sufficient number of unused channels for all planned transmis-
sion links.
with a sufficient number of unused channels for all planned transmis-
sion links.
Via the “
Sync Settings
” submenu, you can set additional transmitter
parameters directly on the diversity receiver and activate or deactivate
the transfer of these parameters to the transmitter (see page 28).
the transfer of these parameters to the transmitter (see page 28).
왘
Synchronize a transmitter with the diversity receiver (see page 19).
The receiver’s frequency, name, pilot tone setting and, where applies,
additional parameters activated via the “
The receiver’s frequency, name, pilot tone setting and, where applies,
additional parameters activated via the “
Sync Settings
” submenu are
transferred to the transmitter.
When synchronizing a transmitter with a diversity receiver, please
observe the following:
observe the following:
왘
Only use a transmitter and a diversity receiver from the same
frequency range (see the type plates on the transmitter and
the diversity receiver).
frequency range (see the type plates on the transmitter and
the diversity receiver).
왘
Make sure that the desired frequencies are listed in the
enclosed frequency information sheet.
You can also contact your Sennheiser partner who will be
pleased to calculate intermodulation-free frequencies for you.
enclosed frequency information sheet.
You can also contact your Sennheiser partner who will be
pleased to calculate intermodulation-free frequencies for you.
왘
Make sure that the desired frequencies are approved and legal
in your country and, if necessary, apply for an operating
license.
in your country and, if necessary, apply for an operating
license.