Cadillac srx 2004 User Manual
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
includes the following:
•
Turn and Lane-Change Signals
•
Headlamps
•
Headlamp High/Low Beam-Changer
•
Flash-To-Pass Feature
•
Fog Lamps
•
Cruise Control
For more information on the exterior lamps, see
Lamps on page 3-18.
Turn and Lane-Change Signals
To signal a turn, move the lever all the way up or down.
The lever returns automatically when the turn is
complete.
The lever returns automatically when the turn is
complete.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
panel cluster will flash in
the direction of the
turn or lane change.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane
change is complete. The lever returns to its original
position when it’s released.
signal a lane change. Hold it there until the lane
change is complete. The lever returns to its original
position when it’s released.
Arrows that flash rapidly when signaling for a turn or
lane change may be caused by a burned-out signal bulb.
Other driver’s won’t see the signal.
lane change may be caused by a burned-out signal bulb.
Other driver’s won’t see the signal.
Replace burned-out bulbs to help avoid possible
accidents. Check the fuse and for burned-out bulbs if
the arrow fails to work when signaling a turn. See
accidents. Check the fuse and for burned-out bulbs if
the arrow fails to work when signaling a turn. See
and Circuit Breakers on page 5-100 for more
information.
information.
3-8