Garmin 720C User Manual
26
Using the Projector
Adjusting the Height of Your Image
If the image is too low, you can raise it by extending the projector’s feet.
1. Stand behind the projector. Press the blue foot release levers and
lift the front of the projector. This unlocks the feet.
2. Once the image is positioned where you want it, release the levers
to lock the feet in position.
3. To fine-tune the height of the image, rotate the thumb wheels
attached to the projector’s feet.
If the image is no longer rectangular after raising it, see the next
section.
section.
caution
Do not hold the projector
by the lens; this can
damage it.
by the lens; this can
damage it.
thumb wheel
720-730.book Page 26 Thursday, October 30, 2003 11:32 AM