Garmin 720C User Manual

6. When you see the message “Do you use this image?” select 

YES

 

and press 

Enter

. If you want to change the area selected, select 

NO

, press

 Enter 

and repeat steps 4 through 6. 

7. Use the directional buttons on the remote control to select a zoom 

rate (display size), and then press 

Enter

. 

8. When you see the message “Do you save the user logo?,” select 

YES

 and press 

Enter

. Saving the logo may take a few minutes. Do 

not use the projector or other sources (computer, video, speaker, 
etc.) while the logo is being saved.

9. When you see the message “Saving the user’s logo is completed,” 

press 

Esc

 or 

Menu

.

 

After your image is saved, you can set it up as the no-signal message 
and/or the screen that’s displayed when you press the 

A/V Mute

 

button.

1. Press the 

Menu

 button to display the main menu (if not already 

displayed).

2. Use the directional buttons to highlight 

Setting

.

3. Press 

Enter

 to select the Setting menu.

4. Use the directional buttons to highlight 

No-Signal Msg

.

5. Use the directional buttons to select 

Logo; 

then press the 

Enter

 

button. This sets your image as the screen displayed when the 
projector is not receiving a signal.

6. If you want to set up your image as the A/V Mute display, use the 

directional

 

buttons to move down to 

A/V Mute

.

7. Use the directional buttons to select 

Logo;

 then press the 

Enter

 

button. This sets your image as the screen displayed when you 
press the 

A/V Mute

 button.

8. When you’re finished, press

 Esc

 or 

Menu

.

To test your setting, press the 

A/V Mute

 button to display your image. 

Press it again to turn off the image.

Do you use this image?

YES

NO

User's Logo

: Select

: Return

: Execute

720-730.book  Page 44  Thursday, October 30, 2003  11:32 AM