Gemini pl-2410 e User Manual

1.  Fill the iron as described in Section 3 “Filling the 

water reservoir” and plug in the iron. Press the 
“increase temperature” regulator (6) to turn on 
the unit.

2. The 

LCD 

screen 

(4) will show all the symbols at 

once and you will hear a beep. Then the screen will 
show Point 1 and the iron will start to heat up.

3.  Select the right temperature. See Section 4 

“Setting the temperature”.

4.  Select the steam option by pressing the steam 

button (5). The iron will give a whistle and 
the       symbol will start flashing. Wait until the         
symbol appears on the screen indicating that the 
steam is ready

5.  When you want to disconnect the steam, again 

press the steam button (5). The        symbol will 
stop flashing.

6.  If you wish to disconnect the iron, hold the 

“increase temperature” setting (6) down for 2 
seconds (Fig. D). The screen will go off with a 
beep.

7.  Unplug the iron and let it cool down before storing 

it away. 

To use this function there must be water in 

the reservoir. If you wish to obtain a spray 
of water to dampen dry or difficult-to-iron 
fabrics, press the spray button (2). The 
spray function is also useful to dampen 
creases created by accident while ironing. 

The spray of water will come through the 

spray nozzle (9) (Fig. E).

 N.B.: It may be necessary to press the 

spray button several times to activate this 
function.

Switch the iron on, as indicated in Section 6 

“Steam ironing”. When the iron has reached 
the temperature selected, press the extra 
steam button (3) while ironing and the 
steam will come through the holes in the 
sole (Fig. F) onto the fabric, smoothing out 
the most difficult creases. Wait for at least 
5 seconds between each use of the extra 

steam button so as to allow the iron to heat 
up again and thereby obtain the maximum 
amount of extra steam. 

Upright steam: The extra steam function 

also works when the iron is in an upright 
position. To use this function, hold the iron 
upright around 15-30 cm away from the item, 
press the extra steam button (3), and the 
steam will come out of the holes in the sole 
(Fig. G). 

CAUTION: Do not direct the iron towards 

people as the temperature of the steam is 
very high.

The shut-off function will work automatically 

when the iron is left unattended whilst 
connected to the mains. 

•  Automatic shut-off while the iron is 

 

If the iron remains immobile for 30 
seconds in an ironing position (horizontal 
or on its side), the iron will disconnect 
automatically. The "     " pause symbol on 
the LCD screen and the light will go off. To 
reconnect, simply move the iron.

 

If the iron remains immobile for 8 minutes 
on its support base (upright), the iron will 
disconnect automatically. “AUTOMATIC 
SHUT-OFF” will appear on the LCD screen 
and the light will go off. To reconnect, 
simply move the iron. N.B: the iron will 
take 60 seconds to reach its previous 
temperature.

Hold the “lower temperature” setting down 

for 2 seconds (7) (Fig. H). EN will appear 
on the LCD screen (4). Press the “lower 
temperature” setting (7) again to change the 
language. The language will change from EN 
(English ) to DE (German), and from DE to 
FR (French). To select the desired language, 
press the “increase temperature” setting (6) 
and the language selected will be set.. N.B.: 
The default language is English. 

13