Garmin gpsmap 541s User Manual

Appendix 

waypoint already Exists—you entered a waypoint name that 

already exists in memory. Modify the waypoint name or delete the 

existing waypoint.
waypoint Memory full—you have used all 1,500 waypoints 

available. Delete unwanted waypoints to make space for new entries.

You can capture a screenshot of any screen displayed on your unit as 

a bitmap (.bmp) file and then transfer it to your computer.

1.  Insert an SD card into the SD card slot on the front of the unit. 
2.  Select 

 > 

 > 

.

3.  Select 

 to turn screenshot captures 

.

4.  When you are on a screen you want to capture, press and hold 

the 

 button for at least six seconds.

5.  Select 

 when the Screenshot Taken window is displayed.

1.  Remove the SD card from the chartplotter and insert it into an SD 

card reader that is attached to a computer.

2.  From Windows Explorer, open the Garmin\scrn folder on the SD 

card.

3.  Copy the appropriate .bmp file on the card and paste it to any 

location on the computer.

The case is constructed of high-quality materials and does not 

require user maintenance, except cleaning.

Clean the unit’s outer casing (except for the screen) using a cloth 

dampened with a mild detergent solution and then wipe dry. Avoid 

chemical cleaners and solvents that may damage plastic components.

The lens on the screen is coated with a special anti-reflective coating 

that is sensitive to skin oils, waxes, and abrasive cleaners. Cleaners 

containing ammonia, alcohol, abrasives, or anti-grease detergents 

will harm the anti-reflective coating. It is important to clean the lens 

using an eyeglass lens cleaner (that is specified as safe for anti-

reflective coatings) and a clean, lint-free cloth.

The following GPSMAP 400 and GPSMAP 500 series chartplotters 

are NMEA 2000 certified and can receive data from a NMEA 2000 

network installed on the boat.
GPSMAP 441/441s  

GPSMAP 536/536s 

GPSMAP 541/541s 

GPSMAP 546/546s