Fujitsu fs-1108au-fs1108mu User Manual
4 0
*Note. When ports that are not used in a cascade connection are selected, the ports are set
and the Hotkey mode ends. When ports that are used in a cascade connection are
selected, the ports are not set and the KVM Switch waits for the selection input of the
ports on the slave side.
Example 1: When port 1 of the master is not connected to a slave, the port is set by
selected, the ports are not set and the KVM Switch waits for the selection input of the
ports on the slave side.
Example 1: When port 1 of the master is not connected to a slave, the port is set by
pressing <1>.
Example 2: When port 1 of the master is connected to a slave, the port is not set by
pressing <1>. The port is set by pressing one of the characters from <F1>
to <F8>.)
to <F8>.)
*Note. From <F1> to <F8> can also be operated by pressing <F> + <1> to <F> + <8>.
*Note. For a 16 port type, from <1> to <9> is supported for each port number. On the slave
*Note. For a 16 port type, from <1> to <9> is supported for each port number. On the slave
side, from <F1> to <F12> is supported for each port number.
(For keyboards with function keys that go up to <F13> or more, up to whatever function
key is the highest on the keyboard is supported.)
For ten or more ports, ports can be selected by using key combinations.
Example 1: When selecting port 16
(For keyboards with function keys that go up to <F13> or more, up to whatever function
key is the highest on the keyboard is supported.)
For ten or more ports, ports can be selected by using key combinations.
Example 1: When selecting port 16
<1> + <6>
Example 2: When selecting port 16 on the slave side
<F> + <1> + <6>
3: Selection by using the mouse
The server can be switched by pressing the right mouse button or <→> in order from the top
or by pressing the left mouse button or <←> to move in the opposite direction. Unconnected
ports and servers without power are skipped.
Press the central mouse button or the right and left button at the same time to set the
selection and end MODE-2 of the Hotkey mode.
or by pressing the left mouse button or <←> to move in the opposite direction. Unconnected
ports and servers without power are skipped.
Press the central mouse button or the right and left button at the same time to set the
selection and end MODE-2 of the Hotkey mode.
iii. AutoScan mode
The mode becomes the AutoScan mode when <0> is pressed. Refer to "11-2-5. AutoScan
mode" for more details.
mode" for more details.
11-2-5. AutoScan Mode
The mode becomes the AutoScan mode when <0> is pressed in the Hotkey mode or the
[AutoScan] switch is pressed on the front panel.
The name of the server is displayed in the top left on the OSD and the "ScrollLock" LED of
the connected keyboard blinks on and off at 400ms intervals.
In addition, the front LED (for selected ports) of a KVM Switch blinks blue at "Timing 1"
intervals.
For a cascade connection, the LEDs of selected ports on the master side blink orange at
"Timing 1" intervals.
[AutoScan] switch is pressed on the front panel.
The name of the server is displayed in the top left on the OSD and the "ScrollLock" LED of
the connected keyboard blinks on and off at 400ms intervals.
In addition, the front LED (for selected ports) of a KVM Switch blinks blue at "Timing 1"
intervals.
For a cascade connection, the LEDs of selected ports on the master side blink orange at
"Timing 1" intervals.
Timing 1