bk reference 31 User Manual

 

13

 

Connecting your analog sources to your processor 
 
Audio / Video source - connecting a DVD/VLD player to the Processor’s analog inputs. Use the same 
instructions for connecting to other audio / video sources such as a satellite receiver, cable box, etc. See 
Connecting Video for use with other than composite and S-video (Omit the video connections for an audio-only 
component such as a CD player.) 
 
Attach one end of the audio interconnect cable to the left audio 
output on the DVD/VLD player, then attach the other end to the 
left (white) DVD/VLD audio input on the processor. Repeat for the 
right (red) audio connection. Attach one end of the composite 
video interconnect cable to the video out on the DVD/VLD player, 
then attach the other end to the yellow video input on the 
processor labeled DVD/VLD. Repeat for the S-video connections 
if you are using S-video. 

Video Monitor - Attach one end of the composite video 
interconnect cable to the video input on the monitor, then 
attach the other end to the yellow video output on the 
processor’s ZONE OUTPUTS. Repeat for the S-video 
connections if you are using S-video. Dual zone operation 
requires connections be made to (ZA) for Zone 1 (A), and (ZB) 
for Zone 2 (B). 
 
 
 

VCR or audio recorder - Connect a VCR to V1. Use the same instructions for connecting to the V2 and TAPE 
analog inputs. If connecting a cassette deck or other audio-only recorder then omit the video connections. 
Attach one end of the audio interconnect cable to the left audio output on the VCR, then attach the other end to 
the left (white) V1 audio input on the processor. Repeat for the right (red) audio connection. Attach one end of the 
composite video interconnect cable to the composite video output on the VCR, then attach the other end to the 
yellow video input on the processor labeled V1. Repeat for the S-video connections if you are using S-video. 

 
Attach one end of the audio interconnect cable to the left audio input on the VCR, then attach the other end to the 
left (white) V1 audio output on the processor. Repeat for the right (red) audio connection. Attach one end of the 
composite video interconnect cable to the composite video input on the VCR, then attach the other end to the 
yellow video output on the processor labeled V1. Repeat for the S-video connections if you are using S-video. 

Left audio input from

DVD output

Composite video input

from DVD output

S-Video input

from DVD output

DVD

Right audio input from

DVD output

Composite video output
to monitor input

S-Video output
to monitor input

ZA

Left audio input

from VCR output

Composite video input

from VCR output

S-Video input

from VCR output

V1

Right audio input

from VCR output

Left audio output

to VCR input

Composite video output

to VCR input

S-Video output

to VCR input

V1

Right audio output

to VCR input