Casio exilim pro ex-f1 User Manual
60
Snapshot Tutorial
5.
Press [SET] to apply the setting.
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• Continuous shutter cannot be used in combination with any of the following.
Movie Mode, some BEST SHOT scenes (Digital Anti Shake, Move Out CS, Move
In CS, Digital Panning)
In CS, Digital Panning)
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• In the Prerecord (Still image) and High-speed CS modes, the flash setting
automatically becomes ? (flash off).
• Zoom is disabled during continuous shutter operations.
• When the High-speed CS speed setting is anything other than “AUTO-N”, the
• When the High-speed CS speed setting is anything other than “AUTO-N”, the
maximum number of images per continuous shutter session is limited for Prerecord
(Still image), Flash CS, and Bracketing, even if there is memory card capacity
available to store more images.
(Still image), Flash CS, and Bracketing, even if there is memory card capacity
available to store more images.
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Flash CS mode switches between the flash and the LED light automatically in
accordance with the CS speed. You cannot switch between the flash and the LED
light manually. In the Flash CS mode, either the flash or the LED light will fire
whenever an image is shot.
light manually. In the Flash CS mode, either the flash or the LED light will fire
whenever an image is shot.
• The Triple Self-time cannot be used in the High-speed CS, Flash CS, and
Bracketing modes.
Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
Continuous Shutter Precautions
High-speed CS speed setting not “AUTO-N”
Up to 60 images
Prerecord (Still image)
Up to 60 images
Flash CS with flash
Up to 3 to 20 images
Flash CS with LED light
Up to 60 images
Bracketing
Up to 5 images
Save Selected: Saves selected images.
Save All
Save All
: Saves all the images.
Cancel Save : Does not save any of the images.