Casio exilim pro ex-f1 User Manual

65

Recording Movies

The image size, aspect ratio, and maximum movie length will depend on the 
frame rate.

Press [0] to start and stop recording.

• When recording certain types of movies, the image that appears on the monitor 

screen may be smaller than normal. When recording an HD movie or high-speed 
movie, there are black bands along the top, bottom, left, and right of the screen.

• When recording a high-speed movie, light source flicker can cause horizontal 

bands to appear in the image. This does not indicate malfunction of the camera.

• Movie recording is disabled while any one of the following BEST SHOT scenes is 

selected.
Digital Anti Shake, Move Out CS, Move In CS, Digital Panning

• During high-speed recording, recording is performed using the same setup as the 

t

 (Auto) recording mode, regardless of which BEST SHOT scene is selected.

• Snapshot in Movie is not supported during high-speed movie recording.
• During High-speed Movie recording, Auto Focus and exposure remain fixed at the 

levels they were when you initially started recording. Zoom, back lighting 
correction, monitor screen content switching, and AE Lock/AF Lock are all 
disabled.

• To focus the image, half-press the shutter button for Auto Focus or focus manually 

before starting the High-speed Movie recording operation.

• When recording a high-speed movie, you can record movies with the A (Aperture 

Priority) mode, S (Shutter Speed Priority) mode, or M (Manual Exposure) mode 
(page 25). Note, however, that you cannot set a shutter speed that is slower than 
the High-speed Movie frame rate.