Zebra 49834 User Manual
290
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Preventive and Corrective Maintenance
Exterior Components—Door-Open Switch Replacement
Door-Open Switch Replacement
This procedure is for replacing the door-open switch. Read these instructions thoroughly
before performing this procedure.
before performing this procedure.
This kit contains the parts and instructions for installing the door-open switch replacement kit
on the 170PAX4 print engine. Read these instructions thoroughly before to installing this kit.
on the 170PAX4 print engine. Read these instructions thoroughly before to installing this kit.
Tools Required
Installation Instructions
Refer to
and remove the print engine from the applicator and open the
rear enclosure.
Remove the Old Door-Open Switch
1.
and
. Open the front cover and locate the door-open switch.
The door-open switch is on the left side of right-hand print engine and on the right side of
left-hand print engine.
left-hand print engine.
2.
. Remove and discard the two switch mounting screws and the nut bar that
secure the door-open switch to the side of the print engine.
Caution • A qualified service technician must perform this installation.
Long #1 Phillips Screwdriver
Phillips Screwdriver Set
Metric Allen Wrench (Hex Key) Set
Anti-Static Wrist Strap