Hercules smart tv satelite User Manual
10/20 – User Manual
- Select the LNB - Switch tab.
- Click on LNB Setup in the LNB Setup 1 zone.
- Select LNB A in the DiSEqC field.
- Click on OK.
- Click on LNB Setup in the LNB Setup 1 zone.
- Select LNB A in the DiSEqC field.
- Click on OK.
- Click on LNB Setup in the LNB Setup 2 zone.
- Select LNB B in the DiSEqC field.
- Click on OK.
- Repeat this procedure for any other LNBs.
- Select LNB B in the DiSEqC field.
- Click on OK.
- Repeat this procedure for any other LNBs.
If your satellite dish is only compatible with
Mini-DiSEqC/Tone Burst:
- Click on LNB Setup in the LNB Setup 1 zone.
- Select Enable in the Tone Burst field.
- Click on OK.
- Click on LNB Setup in the LNB Setup 2 zone.
- Select Enable in the Data Burst field.
- Click on OK.
- Select Enable in the Tone Burst field.
- Click on OK.
- Click on LNB Setup in the LNB Setup 2 zone.
- Select Enable in the Data Burst field.
- Click on OK.
Your configuration should resemble the one in the illustration,
opposite.
- Select the Dish Setup tab.
- Select the Dish 1 preset in the Select Dish field.
- Select DiSEqC 1.2 in the Dish Type field.
- Select the satellite corresponding to your main LNB or your
- Select DiSEqC 1.2 in the Dish Type field.
- Select the satellite corresponding to your main LNB or your
dish’s main position in the Satellite field.
The satellite coordinates in the Degree field are updated
automatically.
automatically.
- Select Setup 1 in the LNB Setup field.
- Click on Apply.
The Strength and Quality signal indicators are updated.
- Click on Scan the Satellite.