Crestron qs touchpanel mounting User Manual
Crestron Touchpanels
Pre-Construction Options
Wallmount Touchpanel Mounting Options/Accessories
quickstart guide
www.crestron.com
800.237.2041
©2006 Specifications subject to
change without notice
change without notice
201.767.3400
For details, check the latest revision of the appropriate mounting kit
Installation Guide for your touchpanel. Refer to the tables on Page 2.
Installation Guide for your touchpanel. Refer to the tables on Page 2.
QUICKSTART DOC. 6140C (2001953) 03.06
1
Crestron Touchpanels
Post-Construction Options
This guide covers mounting options and accessories for Series 1000, TPS-2000L, TPS-3100L Series,
TPS-4000L Series, Isys
TPS-4000L Series, Isys
®
TPS-4L/TPMC-4L Series, TPS-12L/15L,17L, and TPMC-15/17-CH/QM-L
touchpanels.
Pre-Construction Accessory
Trim Mount Kit (TMK)
Used with BB or PMK installations for smaller
irregularities around the opening. This option
provides a smooth, finished appearance and is
preferred when wallpaper is hung.
irregularities around the opening. This option
provides a smooth, finished appearance and is
preferred when wallpaper is hung.
Pre-Construction Accessory
Mud Mount Kit (MMK)
Used with BB or PMK installations to fill in
larger irregularities around the opening. This
option requires plastering.
larger irregularities around the opening. This
option requires plastering.
Wall Mount Kit with Trim Ring
(WMKT)
Wall Mount Kit with Mud Ring
(WMKM)
NOTE: The illustrations in this guide are representative of a mounting option or accessory type. The main
difference in option/accessory types for each touchpanel series is size and, where applicable, the number of
screws required.
difference in option/accessory types for each touchpanel series is size and, where applicable, the number of
screws required.
Pre-construction options (BB, PMK) are
installed prior to hanging drywall, and
require access to an adjacent structural
support (stud). The TMK and MMK acces-
sories are used to correct irregularities in
the holes cut in the drywall.
installed prior to hanging drywall, and
require access to an adjacent structural
support (stud). The TMK and MMK acces-
sories are used to correct irregularities in
the holes cut in the drywall.
Post-construction options (WMKT,
WMKM, WMKB) are for mounting to
finished walls or other surfaces where
access to a structural support member
(stud) is not possible or does not apply
(e.g., lectern mount).
WMKM, WMKB) are for mounting to
finished walls or other surfaces where
access to a structural support member
(stud) is not possible or does not apply
(e.g., lectern mount).
Mounting
Clips
Mounting
Screws
Wall Mount Kit - Bracket
(WMKB - TPS-4L/TPMC-4L)
Mounting
Screws
Mounting
Brackets
Wall Mount Kit - Bracket
(WMKB - LC/CT-1000)
Back Box Kit
(BB)
Use in installations where a back
box is either required or
preferred.
box is either required or
preferred.
Pre-Construction Mount Kit
(PMK)
Use in installations where a back
box is not required or not
preferred.
box is not required or not
preferred.
Used to correct larger irregularities
around the opening. This option
requires plastering.
around the opening. This option
requires plastering.
These kits are used to secure the touchpanel directly to the mounting
surface without requiring an internal mounting plate . The mounting
hardware used depends on the touchpanel. After installation, the
mounting screws are hidden by the touchpanel bezel (not shown).
surface without requiring an internal mounting plate . The mounting
hardware used depends on the touchpanel. After installation, the
mounting screws are hidden by the touchpanel bezel (not shown).
Used to fill in smaller irregularities around
the opening. This option provides a smooth,
finished appearance and is preferred when
wallpaper is hung.
the opening. This option provides a smooth,
finished appearance and is preferred when
wallpaper is hung.