Xerox Document HomeCentre User Manual
23
Install
Attaching the power and parallel
cables
cables
The HomeCentre comes with a power cord that you use to
connect it to an electrical outlet. To connect the
HomeCentre to your PC, see the steps below.
connect it to an electrical outlet. To connect the
HomeCentre to your PC, see the steps below.
Plugging in the parallel cable
Note Before proceeding, lift the HomeCentre’s top lid
and look inside to see if there is any shipping tape
attached to the Carriage. Also, check the paper guide
to see if there is any tape attached. Carefully remove
any tape you find. Finally, lift the HomeCentre’s top
lid and remove the two foam pads from the inside.
and look inside to see if there is any shipping tape
attached to the Carriage. Also, check the paper guide
to see if there is any tape attached. Carefully remove
any tape you find. Finally, lift the HomeCentre’s top
lid and remove the two foam pads from the inside.