ICOM FP-561 User Manual

24

4

r

PLOTTER MODE

q

MARK MANIPULATION

Å

They can be registered in two ways: from the Plotter Menu screen or on the coast-

line screen.

q

Press the [MENU] key.

The Main Menu screen will appear.

w

Select “Plotter Menu” using the [UP] or [DOWN] key and press the [SET] key.

The Plotter Menu screen will appear.

e

Select “Mark Enter/Erase” using the [UP] or [DOWN] key and press the [SET]

key.

The Mark Enter/Erase screen will appear.

r

Select “ENTER” using the [UP] or [DOWN] key and press the [SET] key.

The system is ready for mark registration and the first digit of the latitude setting

field is highlighted in yellow.

t

Select digits in the latitude setting field using the [LEFT] or [RIGHT] key, enter a

numerical value and specify the latitude direction, N (North) or S (South), using

the [UP] or [DOWN] key, and then press the [SET] key.

The first digit of the longitude setting field is highlighted in yellow.

y

Select digits in the longitude setting field using the [LEFT] or [RIGHT] key, enter

a numerical value and specify the longitude direction, E (East) or W (West),

using the [UP] or [DOWN] key, and then press the [SET] key.

One of 12 marks will appear at the bottom of the screen.

u

Select the desired mark using the [UP] or [DOWN] key and the desired color of

the mark (seven colors selectable) using the [LEFT] or [RIGHT] key, and then

press the [SET] key.

The character list will appear at the bottom of the screen and END is highlight-

ed in yellow.

i

Select a character from the character list to name the mark, and then press the

[SET] key.

Each time the [SET] key is pressed, the selected character is entered in the

comment field.

* A comment such as a user-defined mark name of up to eight characters can be

entered in each comment field.

o

Select “END” and press the [SET] key.

The mark is now registered.

* Repeat steps 

t

to 

o

as required.

 ENTER

   LAT   34°25.123N

   LON  135°10.456

E

 ERASE ALL

5

Enter the latitude and longitude 
and press the [SET] key.

Select the desired mark and 
press the [SET] key.

Enter the mark name and 
press the [SET] key.

5

¡

Mark Enter/Erase screen

¡

Selecting the mark to be 
used

¡

Entering the user-defined 
mark name

GPS   34ﾟ 18. 000N  135ﾟ 01. 000E

GPS   34ﾟ 18. 000N  135ﾟ 01. 000E

GPS   34ﾟ 18. 000N  135ﾟ 01. 000E

5

CLR

SET

SET

CANC

ADJ

SEL

80.0FT

   MARK ENTER/ERASE

 ENTER

   LAT   34°25.123N

   LON  135°10.456E

 ERASE ALL

CLR

SET

SET

CANC

TYPE

COL

80.0FT

   MARK ENTER/ERASE

 ENTER

   LAT   34°25.123N

   LON  135°10.456E

        Point1

 ERASE ALL

CLR

SET

SET

CANC

80.0FT

   MARK ENTER/ERASE

SEL

 " #  

END

ABCDEFGHIJKLMNOPQRS

TUVWXYZ  0123456789

abcdefghijklmnopqrs

tuvwxyz .,!#$%&´-()