IronPort Systems ES-1528 User Manual

 Chapter 4 The Web Configurator

ES-1528 User’s Guide

A - The LED panel displays the port status.
B - The navigation panel has links to screens that let you configure the switch features.
C - The function frame allows you to view and edit individual feature settings.
D - Use the Help link to find out more information about the fields in the screen you are 
configuring. 

Use the LED panel to view the status of the individual ports. The LED panel in the web 
configurator updates automatically every 5 seconds. 

Figure 16   LED Panel 

The following table describes the labels in this screen.

Navigate to individual feature configuration screens from the navigation panel.
The following table describes the links in the navigation panel. 

Table 3   LED Panel

1G

This LED is green if the corresponding port has a 1 Gbps connection.

100

This LED is green if the corresponding port has a 100 Mbps connection.

Full

This LED is green if the corresponding port is transmitting in full duplex 

mode.

Link

This LED is green if the corresponding port has an Ethernet connection. It 

is orange if the port has been disabled.

1...28

This number indicates the port number on the switch.

Table 4   Navigation Panel Links 

System

Use these screens to view general system information such as firmware version, IP 

address and so on. You can also use this screen to backup and restore your 

configuration.

Status

Use this screen to view general system and hardware monitoring information. 

Password

Use this screen to change the system login password

Firmware

Use this screen to perform firmware upgrades

Restart/

Reset

Use this screen to reboot the switch or to restore the default configuration of the 

switch.

Port 

Use these screens to view the status and configure settings for individual ports on 

the switch.