INSTEON 2412N User Manual

2412N Rev. 9/5/2012 4:00 PM / See Owner’s Manual for Warranty Information.

Protected under U.S. and foreign patents (see www.insteon.com)

Quick Start Guide

INSTEON

SmartLinc

™

Central Controller

Model: 2412N

About INSTEON SmartLinc

SmartLinc puts the power of managing your entire INSTEON home

automation network in the palm of your hands. Just plug this module into

your router and into a wall outlet, and you’ll be able to wirelessly control all

your INSTEON devices.

Control any INSTEON compatible device with from your iOS/Android

smartphone or tablet (via the free INSTEON app) or any web browser (with

the web-based interface). Link devices, create scenes, set timers and more,

all from an intuitive interface.

In the Box

•

SmartLinc

• 6’ Ethernet cable (color varies)

Download INSTEON App

If you have an iOS/Android smartphone or tablet, install the INSTEON app prior to installing SmartLinc. It’s
completely free with no monthly fees and makes setting up and configuring SmartLinc super simple. To download the
INSTEON app, just scan a QR code below or visit your favorite app store/marketplace and search “INSTEON.”

Installation

1) Plug included Ethernet cable into an open LAN port on your router

2) Plug other end of Ethernet cable into SmartLinc Ethernet jack

3) Plug SmartLinc into unswitched AC outlet

SmartLinc status LED will turn on dim, solid white

4) Verify proper connection between SmartLinc and router

LED on router port into which SmartLinc is plugged will turn on

SmartLinc Ethernet jack LED will turn on green

5) If using INSTEON app, launch app on smartphone/tablet and follow onscreen instructions to configure SmartLinc

Use Web-Based SmartLinc Interface

If you do not have an iOS/Android smartphone or tablet, set up SmartLinc with the web-

based interface to control your INSTEON network from any web browser, including web-

enabled mobile devices.

1) While connected to the Internet, open web browser on PC or web-enabled mobile

device and go to http://smartlinc.smarthome.com

Note: JavaScript support is required for the default web server application. An

HTML version is available for devices that do not support JavaScript (see step 3).

2) Click I’m at home

3) Click link that begins with http:// or, to access the HTML version, type hindex.htm to

the end of your web address

SmartLinc homepage will load

Status LED

Set button

Ethernet jack

and LED

Pass-through outlet

Included Ethernet

cable (color varies)