Iomega 333401 User Manual
15
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
1
Remove any CD-ROM disks or floppy disks from
the computer’s drives, turn off the power
switch, and disconnect the power cord.
the computer’s drives, turn off the power
switch, and disconnect the power cord.
WARNING: Always disconnect computer electrical power at the power
source before beginning any computer hardware change.
source before beginning any computer hardware change.
2
Remove the computer cover.
(Most computers have three or four screws on the rear panel that hold the
cover. Refer to your computer manual if removal is unclear.)
cover. Refer to your computer manual if removal is unclear.)
3
Locate a vacant 5
1
/
4
-inch horizontal drive bay.
Remove the plastic cover and, if necessary, the
metal shield.
metal shield.
Metal Shield
Plastic Cover
51/4-inch Bay
Tower View
Metal
Shield
Shield
Plastic
Cover
Cover
51/4-inch Bay