Intel PCI User Manual

Page of 54
GigMAC-PMC and PCI 
GigPMC Switch  
 
Board and Driver Users Manual 
DSS NETWORKS, INC. 
Version: 2.6 
  Page: 26 
 
Step 2 – Remove the CompactPCI or Embedded Mainboard controller from the system, 
if necessary to access the PMC slot. This will allow the PMC adapter card to be more 
easily installed. Consult your User's Manual for assistance in opening and removing the 
mainboard. The PMC card has 3 connectors labeled JN1, JN2 and JN3. JN1 and JN2 
are required for all modes of operation while JN3 is required only for 64-bit mode. Your 
CompactPCI mainboard or other PMC carrier will also contain PMC card connectors 
labeled JN1 and JN2, and optionally JN3 and JN4. JN4 is for optional user-defined I/O 
and is only used by the Model 5468 GigPMC switch. Additionally, the mainboard may 
also contain either a 5 volt or 3.3 volt key to prevent voltage mismatches. Since the 
PMC card may operate from a 5 or 3.3 volt supply, it can be used in either a 5 or 3.3 
volt keyed system. It is very important to align the connectors before pressing the PMC 
card onto the mainboard to prevent damage to the card or slot. 
 
Step 3 - Align the PMC connectors and the system motherboard Connectors and push 
down firmly on the PMC card until it is completely seated in the connectors on the 
mainboard. Once the adapter card has been successfully installed, re-install the 
mainboard. Re-attach the power cable and any other cables that were removed for the 
hardware installation procedure.  
 
 
9. COPPER CABLING AND CONNECTOR INFO 
 
9.1. FIBER CABLE SPECIFICATIONS 
 
 
Distance (Model 6267-SFP, 5261-LC, 5262-LC, 5262-SC, 5263-SFP 
multimode/singlemode fiber) 
 
(1000-base-SX 850nm multimode) 
(1000-base-LX 1310nm singlemode)
 
 
 
 1000BASE-SX/LX (850 nm Laser for multimode-SX, 1310nm laser for single-mode-LX)
 Fiber Core 
Diameter 
 Type 
 Fiber 
Bandwidth 
Mhz* km 
 Distance 
 62.5/125 um 
 multi-mode 
 160 Mhz * km   2 to 220 m 
 62.5/125 um 
 multi-mode 
 200 Mhz * km   2 to 275 m 
 50.0/125 um 
 multi-mode 
 400 Mhz * km   2 to 500 m 
 50.0/125 um 
 multi-mode 
 500 Mhz * km   2 to 550 m 
   8.0/125 um 
 single-mode 
 500 Mhz * km   5-10 km