IBM nec pd78p081(a2) User Manual

PG-1500

This is a PROM programmer capable of programming the single-chip microcontroller with on-chip

PROM programmer

PROM by manipulating from the stand-alone or host machine through connection of the

separately available programmer adapter and the attached board.  It can also program separate

PROM ICs with a capacity from 256 Kbits to 4 Mbits.

PA-78P083CU

This is a PROM programmer adapter for the 

µ

PD78P083, and is used connected to the PG-1500.

PA-78P083GB

PA-78P083CU: 42-pin plastic shrink DIP (600 mil)

PROM programmer

42-pin ceramic shrink DIP (with window) (600 mil)

adapter

PA-78P083GB: 44-pin plastic QFP (10 

×

 10 mm)

PG-1500 controller

This program controls the PG-1500 from the host machine through serial and/or parallel interface

cable(s).

Part Number: 

µ

S

××××

PG1500

××××

 of the part number differs depending on the host machine and OS used.  Refer to the table below.

µ

S

××××

PG1500

××××

Host Machine

OS

Medium

5A13

PC-9800 Series

MS-DOS

3.5-inch 2HD

5A10

(Ver. 3.30 to 6.2

)

5-inch 2HD

7B13

IBM PC/AT and their

Refer to A.4

3.5-inch 2HC

7B10

compatible machines

5-inch 2HC

The task swap function is not available with this software through the function is

provided in MS-DOS version 5.0 or later.