Intel express 550t User Manual
500.bok : 50003 45 Fri Sep 11 14:52:16 1998
45
C H A P T E R 3
Standard Configuration
Local Time
Setting the date and clock
to local time
to local time
To change the clock in the switch to your local time:
1
Select
Device Setup
or
Stack Setup
.
2
Click
Date/Time
.
3
Click
Insert Current PC Date/Time
to show the
present settings. If this is satisfactory, click
OK
.
Note
The clock displays the time at which it is accessed
and not the current time.
and not the current time.
4
If the time or the date is not satisfactory, click the date and/or
time options and type the new time and date.
time options and type the new time and date.
5
Click
OK
.
Authentication
Purpose
SNMP is a fully defined, interoperative standard that helps you man-
age both the switch and the network. To do this you can:
age both the switch and the network. To do this you can:
•
Specify the names of the hosts to access the SNMP agent on the
switch (authentication) by defining the source IP and community
switch (authentication) by defining the source IP and community
•
Specify read-write or read-only for authenticated hosts
•
Request a trap to be sent if authentication is violated
Note
If no hosts are defined in the Authentication List, any host
can access the SNMP agent in the switch.
can access the SNMP agent in the switch.