Lowrance electronic ifinder expedition c User Manual

Page of 144
12 
Battery Installation 
Turn the unit over so that the back is facing you. With your thumb or 
nail, pull back on the small clip to release the battery cover latch as 
shown in the following images. Once the latch is released, pull the bat-
tery cover out of the grooves in the bottom of the case. 
     
 
Remove the iFINDER battery cover. 
Install the batteries according to the embossed signs in the battery com-
partment. They show the correct polarity. Point the positive pole of the 
upper battery to the left; point the positive pole of the bottom battery to 
the right.  
NOTE: 
Inside the battery compartment is a rotating MMC card lock. The 
grip on this lock must be turned parallel with the direction of the 
batteries for them to fit properly. 
Replace the battery compartment cover. First, align the latch tabs at the 
bottom of the cover with the slots at the case's base. Press the cover into 
place, then firmly push up on the clip at the top of the cover until it 
latches in place. There is usually an audible click when the latch engages. 
    
 
Replace battery compartment cover. Align tabs with slots 
in the base (left). Press latch firmly until it clicks (right).