Lowrance electronic ifinder expedition c User Manual

33 

The example shows the home waypoint set at the cursor location. If the 

cursor was not active, the point would be placed at the current position. 
Caution: 

Go Home 
This command will automatically take you back to the Home waypoint 

you created. 
1. Press 

|

↓ to 

 |

and

follow navigation arrows on the 

Map Page or the compass rose on the Navigation and Compass Pages. 
To cancel navigation, press 

|

↓  to 

|

|

← to 

|

. The iFINDER stops showing navigation information. 

One of boating's most terrifying events is having a friend or family 

member fall overboard. This unit has a man overboard feature that 

shows navigation data to the location where the feature was activated. 

To activate it, press the 

 and 

 keys at the same time. Your posi-

tion at the time these keys are pressed is used as the man overboard 

position. 
Caution: 

Navigate Back to MOB Waypoint 
Find your way back to the position with the Navigation Page or Map 

Page. When MOB is activated, the Navigation Page automatically 

shows the compass rose with its bearing arrow pointing toward the 

man overboard position. The destination name says Going To Man 

Overboard and the Map Page displays a Man Overboard waypoint, rep-

resented by a human figure. The steering arrow will guide you to that 

position. The man overboard position is stored in the waypoint table for 

future reference. It can be edited the same as any other waypoint in 

Advanced Mode. This prevents the inadvertent loss of the current Man 

Overboard position. 

You don't need to have an emergency to use the MOB waypoint. In 

Easy Mode, it is the only way you can set a waypoint other than the 

Home waypoint. When you set the MOB point, cancel navigation 

and use it like a regular waypoint. (Remember, you can set 1,000 

waypoints in Advanced Mode.)