Lennox mlbv-35 User Manual

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Package 1 of 1 contains:
 

(1) - Left Side Panel

 

(1) - Right Side Panel

 

(1) - Rear Panel

Brickaded PaNeL LiNer kit 

(MLBV/SLBV) 

Step 1.  Follow the procedure “Turning Off Gas To Unit,” located on the 

Lighting Instructions pullout label in the control compartment 

of the unit and also in the appliance Installation Instructions.

Step 2.  Remove the front glass enclosure panel (see appliance Instal-

lation Instructions). 

Step 3.  If applicable, carefully remove the log set from the firebox, and 

place them in a safe location.

Step 4.  Refer to Figure 3. Carefully bend the Tab to the RIGHT; then 

place the rear panel against the rear wall of the firebox. Return 

the Tab to its original vertical position after installation.

Step 5.  Refer to Figures 3 and 4. Carefully slide the left side panel 

into the firebox between the firebox wall and the lintel.

Step 6.  Repeat Step 5 for the right side panel.
Step 7.  Carefully replace the log set and glass enclosure panel. Refer 

to the appliance Care and Operation Instructions for details on 

log placement enclosure panel installation.

HEARTH PRODUCTS 

KITS AND ACCESSORIES

Brickaded panel liner kits and related fireplaces are listed below.