Lantronix 900-422 User Manual
Chapter 5: Using DeviceInstaller
XPress DR+ User Guide
44
Setting
Description
Supports Dynamic IP
Non-configurable field. Indicates whether the current IP
address on the XPress DR+ was set manually or assigned
automatically.
address on the XPress DR+ was set manually or assigned
automatically.
DHCP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by DHCP.
Dynamic IP. True indicates that the IP address can be
assigned automatically by DHCP.
BOOTP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by BOOTP.
Dynamic IP. True indicates that the IP address can be
assigned automatically by BOOTP.
RARP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by RARP.
Dynamic IP. True indicates that the IP address can be
assigned automatically by RARP.
Subnet Mask
Non-configurable field. Displays the unit's current subnet
mask. To change the subnet mask, see
mask. To change the subnet mask, see
Assigning an IP
Address
on page 41.
Gateway
Non-configurable field. Displays the unit's current gateway. To
change the gateway, see
change the gateway, see
Assigning an IP Address
on page
41.
Number of Ports
Non-configurable field. Displays the number of ports on the
XPress DR+.
XPress DR+.
TCP Keepalive
Non-configurable field. Displays the unit's TCP keepalive
value. The value is in the range 1-65s, and the default setting
is 45.
value. The value is in the range 1-65s, and the default setting
is 45.
Supports Configurable
Pins
Pins
Non-configurable field. Displays False, indicating configurable
pins are not available on the XPress DR+.
pins are not available on the XPress DR+.
Supports Email Triggers
Non-configurable field. Displays False.
Supports AES Data
Stream
Stream
Non-configurable field. Displays False.
Supports 485
Non-configurable field. Displays True. XPress DR+ supports
the RS-485 protocol.
the RS-485 protocol.
Supports 920K Baudrate
Non-configurable field. Displays False. XPress DR+ supports
baud rates up to a maximum of 230 Kbaud.
baud rates up to a maximum of 230 Kbaud.
Supports HTTP Server
Non-configurable field. Displays True.
Supports HTTP Setup
Non-configurable field. Displays True.
Supports 230K Baud
Rate
Rate
Non-configurable field. XPress DR+ supports a baud rate of
230 Kbaud. Displays True.
230 Kbaud. Displays True.
Supports GPIO
Non-configurable field. Displays False.