Lantronix 900-422 User Manual

62 

Select Pre-Shared Keys from the drop-down list. 

Select the encryption type from the pull-down menu. CCMP is 
the default encryption. 

Select the key type (Hex or Passphrase). 

Enter the Encryption Key in hexadecimal value if Hex is 
selected as the key type. Enter the key as a string if 
Passphrase

 is selected as the key type. Passphrase input is 

not the same as ASCII input. 
 
A passphrase of more than 20 characters is recommended. 
Spaces and punctuation characters are permitted. 

The XPress DR+W permits the control of the transmission 
data rate. Click the Auto check box to allow the unit to 
automatically set the data rate (or leave it unchecked to set 
the transmission rate manually). The default rate is 11 Mbps. 
 
If the Auto check box is selected, choose the maximum data 
rate from the drop down menu.  
 
If the Auto check box is not selected, select the fixed data 
rate (in Mbps) from the drop down menu.  
 

rates: 18 Mbps, 24 Mbps, 36 Mbps, and 54 Mbps. 

Power management reduces the overall power consumption 
of the XPress DR+W unit. Selecting Enable increases the 
response time. Power management is not available in Ad Hoc 
mode. 

1.  To save and apply the configuration changes to the device server, click the Apply 

 button. 

1. Click 

the 

 button to set the device server back to the default settings. 

For details see 

 on page 91.  

2. Click 

 to set factory settings, or click No to cancel.