Lantronix 900-422 User Manual

Chapter 10: Setup Mode: Advanced Settings

XPress DR+ User Guide

Note:

The Y (Yes) option disables many of the GUI tools for configuring the unit,

including the embedded Web Manager tool.

Disable Web Server

This setting defaults to the N (No) option. The Y (Yes) option disables the web server.

Disable Web Server (N) ? _

Disable Web Setup

The Y (Yes) option disables configuration using the Web Manager. This setting defaults
to the N (No) option.

Disable Web Setup (N) ? _

Disable ECHO Ports

This setting controls whether port 7 echoes characters it receives.

Disable ECHO ports (Y) ? _

Enable Enhanced Password

This setting defaults to the N (No) option, which allows you to set a 4-character password
that protects Setup Mode by means of Telnet and web pages. The Y (Yes) option allows
you to set an extended security password of 16-characters for protecting Telnet and web
page access.

Enable Enhanced Password (Y) ? _

Default Settings (Option 7)

Select 7 to reset the unit’s channel configuration, email settings, and expert settings to
the default settings. The server configuration settings for IP address, gateway IP address,
and netmask remain unchanged. The configurable pins’ settings also remain unchanged.
The specific settings that this option changes are listed below.

Channel 1 and Channel 2 Configuration Settings

Baudrate

9600

I/F Mode

4C (1 stop bit, no parity, 8 bit, RS-232C)

Own TCP port number

Channel 1: 10001
Channel 2: 10002

Connect Mode

C0 (always accept incoming connection; no active
connection startup)

Hostlist retry counter