Lexmark x 748dte User Manual
= Supported
X = Not supported
Envelope sizes
Printer model
Size name
Literal name
Size (mm)
Size (inches)
Size (points)
C746, C748
X746,
X748
Commercial 10
4.125x9.5envelope
104.8 x 241.3
4.125 x 9.5
297 x 684
International B5
176x250envelope
176 x 250
6.93 x 9.84
499 x 708
International C5
162x229envelope
162 x 229
6.38 x 9.01
459 x 649
International DL
110x220envelope
110 x 220
4.33 x 8.66
312 x 624
Other envelope
otherenvelope
296.93 x 427.48 11.69 x 16.83
842 x 1212
Literal names supported
= Supported
X = Not Supported
Literal names
Printer model
Literal name
Compatible literal name
C746, C748
X746, X748
b5envelope
176x250envelope
X
X
c5envelope
162x229envelope
com10envelope
4.125x9.5envelope
dlenvelope
110x220envelope
monarcenvelope
3.875x7.5envelope
PostScript envelope tray support
If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the
envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:
envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:
•
The printer sets the PageSize Policy to 0.
•
The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the
envelope is fed from the active source.
envelope is fed from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
•
If the requested size and the size loaded in the active source do not match, then the sources are searched in the
order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
•
If the requested media size is not found by the previous search, then the following search order is used:
–
Envelope feeder
–
Multipurpose feeder
PostScript (PS) emulation
16