Lexmark x 748dte User Manual
•
If the requested size and type are not available from any automatic source, then you are prompted to load the
requested envelope size and type in the manual feed source.
requested envelope size and type in the manual feed source.
•
If the size is still not available, then a configurationerror is issued, and the print job is flushed.
If manualfeed or ManualFeed is true, then the printer prompts you to load the requested size manually. If no manual
feed exists on the printer, then a rangecheck error message is issued.
feed exists on the printer, then a rangecheck error message is issued.
The envelope tray the printer selects when it receives an envelopetray operator is listed in “Envelopetray operator
selections” on page 17. These operators are equivalent to executing the following PostScript emulation sequence:
selections” on page 17. These operators are equivalent to executing the following PostScript emulation sequence:
<</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >>
setpagedevice
where x y are the PageSize in points.
Envelopetray operator selections
= Supported
X = Not supported
Tray operators
Printer model
Operator
Tray selected (corresponding image size is set)
C746, C748
X746, X748
110x220envelopetray
Tray with 110 x 220
‑size envelopes
dlenvelopetray
Tray with 110 x 220
‑size envelopes
162x229envelopetray
Tray with 162 x 229
‑size envelopes
c5envelopetray
Tray with 162 x 229
‑size envelopes
176x250envelopetray
Tray with 176 x 250
‑size envelopes
b5envelopetray
Tray with 176 x 250
‑size envelopes
3.875x7.5envelopetray
Tray with 3.875 x 7.5
‑size envelopes
monarcenvelopetray
Tray with 3.875 x 7.5
‑size envelopes
3.875x8.875envelopetray
Tray with 3.875 x 8.875
‑size envelopes
4.125x9.5envelopetray
Tray with 4.125 x 9.5
‑size envelopes
com10envelopetray
Tray with 4.125 x 9.5
‑size envelopes
otherenvelopetray
Tray with other size envelopes
PostScript (PS) emulation
17