Fujitsu MX130 S1 VFY:M1301SC010IN/M5 Data Sheet
Product codes
VFY:M1301SC010IN/M5
Data Sheet
Fujitsu PRIMERGY MX130 S1 Server
Page 4 / 6
http://ts.fujitsu.com/Primergy
Number of fans
3
Fan configuration
1x power supply fan, 1x system fan, 1x processor fan
Fan notes
non hot plug
Operating panel
Operating buttons
On/off switch
Status LEDs
Power (green)
Operating Systems and Virtualization Software
Certified or supported operating
systems and virtualization software
systems and virtualization software
Microsoft® Microsoft® Hyper-V™ Server 2008 R2
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Foundation
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Foundation
Operating system release link
http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Operating system notes
Support of other Linux derivatives on demand
Server Management
Standard
ServerView Installation Manager
Dimensions / Weight
Floor-stand (W x D x H)
340 x 380 x 100 mm
Weight
10 kg
Weight notes
Actual weight may vary depending on configuration
Environmental
Noise emission
According to ISO9296 (LpAm at bystander position)
Sound pressure (LpAm)
19 dB(A) (idle)/ 21 dB(A) (operating); may vary according to configuration.
Sound power (LWAd; 1B = 10dB)
3.5B (idle) / 3.7B (operating); may vary according to configuration.
Operating ambient temperature
10 - 35°C
Operating temperature note
ETSI 300 019-2-3 Class 3.1
Electrical values
Power supply configuration
1
Max. output of single power supply
250 W
Standard power supply output
250 W
Rated voltage range
100 V - 127 V / 200 V - 240 V
Rated frequency range
47 Hz - 63 Hz
Rated current max.
100 V – 240 V / TBD
Rated current in basic configuration
100 – 240 V / TBD
Compliance
Germany
GS
Europe
CE Class B
Global
CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Compliance notes
There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Compliance link
https://sp.ts.fujitsu.com/sites/certificates/default.aspx