Line 6 AXSys 212 User Manual
Chapter 2: The Guided Tour
18
AxSys 212 User Manual
example, you could use the Wah pedal to control the level of reverb or the
delay speed. See page 25 for more info.
delay speed. See page 25 for more info.
Both the Volume pedal and Wah pedal effects may be controlled via MIDI
using controllers 7 (for Volume) and 3 (for Wah). Likewise, the pedals
connected to the
using controllers 7 (for Volume) and 3 (for Wah). Likewise, the pedals
connected to the
PEDAL 1 (VOLUME)
and
PEDAL 2 (WAH)
jacks will
transmit the same MIDI controller messages when used.
If no pedals are connected to either
PEDAL 1 (VOLUME)
or
PEDAL 2 (WAH)
jacks
and the
WAH TYPE
parameter (see page 24) is set to either
1 or 5, the Wah will be
turned off automatically. This means you can have a Sound that uses Wah only
when a pedal is connected, and otherwise wonÕt have the Wah stuck wide-open.
Incidentally, since you can control the Wah via MIDI (using controller 3), the
Wah effect will automatically turn on if controller 3 messages are received by the
AxSys.
when a pedal is connected, and otherwise wonÕt have the Wah stuck wide-open.
Incidentally, since you can control the Wah via MIDI (using controller 3), the
Wah effect will automatically turn on if controller 3 messages are received by the
AxSys.
Using the Aux Input
The
AUX INPUT
has its own EQ (Bass and Treble), Mix and Reverb controls.
These can be found in the top-most Edit Row (
AUX/MIDI
).
The Aux Input parameters are stored with each Sound, letting you
remember different settings and have them recalled with each Sound. Or,
you can have the Aux Input parameters always stay the same when a
Sound is selected. You can choose between these two modes by using the
remember different settings and have them recalled with each Sound. Or,
you can have the Aux Input parameters always stay the same when a
Sound is selected. You can choose between these two modes by using the
AUX PER SOUND
parameter. This is a global parameter; i.e. it is not stored
with each Sound (see page 37).
Display
Description
Snd
The Aux Input parameters will change when a new Sound is selected
to the stored settings for that Sound.
to the stored settings for that Sound.
ALL
The Aux Input parameters will not change when a new Sound is
selected. In other words, the Aux Input parameterÕs current settings
will be used for all Sounds.
selected. In other words, the Aux Input parameterÕs current settings
will be used for all Sounds.