Nortel Networks 2210 User Manual
37
User Option menu
User Option menu
When the 2210 Wireless Handset is in standby mode (power is on, but the handset is
not in use), press and briefly hold the
not in use), press and briefly hold the
Function
key to display the User Option menu.
This section describes the following standard User Option menu items:
• Ring Type
• Noise Mode
• Alias IP Address
• Current IP Address
• Extension
• Current Call Server
• Terminal Type
• Noise Mode
• Alias IP Address
• Current IP Address
• Extension
• Current Call Server
• Terminal Type
Check with your system administrator for specific features supported by your 2210
Wireless Handset.
Wireless Handset.
Select Ring Type
The Ring Type option allows you to set the Wireless Handset ring tone for the three
different ringers: Telephone, Auxillary 1, and Auxillary 2.
different ringers: Telephone, Auxillary 1, and Auxillary 2.
Note: Auxillary 1 and Auxillary 2 are reserved for future use.
To select Ring Type:
1. Press and hold the
Function
key when
in the standby state.
2. Use the
Up
and
Down
buttons to scroll
through the menu and highlight
Ring
Type
.
3. Press the
Select
button (or the
OK
soft
key) to select the option. The next menu
level displays.
level displays.
Ring Type