Konica Minolta DiMAGE S414 User Manual
100
DATA-TRANSFER MODE
DISCONNECTING THE CAMERA FROM THE COMPUTER
Windows Me, 2000 Professional, and XP
Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB cable.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
the task bar. A small window will open indicating the device to be stopped.
Windows 98 / 98 Second Edition
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon; a small window indicating the unplug-or-eject-
hardware routine will open. Click on the small window.
except right click on the unplug-or-eject-hardware icon; a small window indicating the unplug-or-eject-
hardware routine will open. Click on the small window.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then
disconnect the USB cable.
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then
disconnect the USB cable.
Never disconnect the camera when the access lamp is red - the
data or memory card may permanently be damaged.
data or memory card may permanently be damaged.