Konica Minolta DiMAGE S414 User Manual

18

EXTERNAL POWER SUPPLIES (SOLD SEPARATELY)

CHANGING THE COMPACTFLASH CARD

The AC Adapter allows the camera to be powered from an electrical household outlet. The AC
Adapter is recommended when the camera is interfaced with a computer or during periods of heavy
use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan; AC-2L is for use in all
other areas.

The External High-power Battery Pack Kit EBP-100 is a portable source of power for the camera. The
kit contains a high-power lithium-ion battery, holder, and charger. The battery and charger are also
available separately. This battery pack will significantly extend the operating time of the camera.

A type I CompactFlash card must be inserted for the camera to operate. If a card has not been
inserted, a no-card warning will automatically be displayed on the monitor and three dashes (– – –)
will be displayed on the data-panel frame counter. For CompactFlash card care and storage, see
page 109.

Always turn off the camera before changing between
power supplies.

Remove the DC terminal cover from the left. The cover is
attached to the body to prevent loss.

Insert the mini plug of the AC adapter or battery pack into the
DC terminal. Always remove exhausted batteries before
connecting an external power supply. Wait thirty seconds
between removing the old batteries and plugging in the
external power source.

Insert the AC adapter plug into an electrical outlet.